Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

MAX80 Equivalent

Product No.：TFMAX105M
Online Inquiry

Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Hydranautics HYDRAcap MAX80

General Information

TFMAX105M is manufactured as the direct equivalent, replacement, alternative, retrofit and analogue to Hydranautics HYDRAcap MAX80 UF membrane module.
Hydranautics HYDRAcap MAX80 equivalent ultrafiltration (UF) membrane module TFMAX105M is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.

TFMAX105M UF modules are applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.

Features

Outside-to-inside flow direction
New generation PVDF hollow fiber
Uniform pore size of 0.08 μm
Typical filtrate turbidity ≤ 0.1 NTU
Bacteria removal ≥ 4 log

Advantages

High tolerance for feed water
High-quality filtrate
Less energy needed for high flux
Longer service life by high fouling resistance and mechanical strength
Economical equivalent module for direct replacement of Hydranautics HYDRAcap MAX80

Applications

Surface water
Potable water
Beverage clarification
Industrial wastewater
Reclaimed water reuse
Pre-treatment of seawater desalination

Module Dimensions

Model

(mm/in)

Connection port

Air inlet

TFMAX105M

2340.6/92.15

2232.7/87.9

2110.9/83.11

250/9.84

290/11.42

172/6.8

DN50 (2” Victaulic)

3/8” FNPT

Specifications

Specifications	Parameters
Model	TFMAX105M
Effective membrane area (m²/ft²)	105/1130
Filtrate flow rate m³/h (gpm)	3.6 - 12.6 (15.7 - 55.5)
Dry weight (KG/lbs)	62/135
Wet weight filled with water (KG/lbs)	118/260
Membrane material	PVDF (Polyvinylidene Fluoride)
Fiber ID/OD	0.6/1.2 mm (0.024/0.047 inch)
Flow direction	Outside-in
Pore size	0.08 μm
Housing material	UPVC
Potting material	Epoxy resin

Operating and Cleaning Limits

Type of operation	Dead-end flow or cross flow
Typical flux (25°C)	34 - 120 L/m²·h (20 - 71 gfd)
Temperature	1 - 40°C (34 - 104°F)
Maximum feed pressure (20°C)	5 bar (73 psi)
Maximum feed pressure (40°C)	3 bar (44 psi)
Maximum trans-membrane pressure	2 bar (30 psi)
Backwash flux (25°C)	75 - 120 L/m²·h (48 - 71 gfd)
Maximum backwash pressure	2.5 bar (36 psi)
Maximum air scour feed pressure	2.5 bar (36 psi)
Air scour flow	12.3 - 15.4 Nm³/h (7.3 - 9.1 acfm)
Air scour duration	2 - 4 minutes
Air scour frequency	Once every 20 - 60 minutes
pH-Continuous operation @25°C	2 - 11
pH-Cleaning @25°C	1 - 13
Maintenance cleaning frequency	1 - 3 times per day
Maintenance clean duration	20 - 30 minutes
Disinfection chemicals	NaOCl, ClO₂ or NH₂Cl
Cleaning chemicals	NaOH, HCl, H₂SO₄ or citric acid
Instantaneous chlorine tolerance	5,000 ppm
Maximum chlorine exposure	750,000 ppm-hrs
Maximum feed TSS	100 ppm
Maximum feed turbidity	300 NTU
Maximum feed particle size	300 µm
Filtrate SDI₁₅	≤ 2.5
Filtrate turbidity	≤ 0.1 NTU

We offer various UF membrane module equivalents. If you and your customer accept Hydranautics HYDRAcap MAX80 equivalent ultrafiltration membrane, please send us an inquiry now.

Previous Product：Max 80-A Equivalent Next Product：MAX 80 Substitution