Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module
Max 80-A Equivalent
- Product No.:TFMAX105MA
Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Hydranautics HYDRAcap MAX 80-A, MAX80-A
General Information
Hydranautics HYDRAcap MAX 80-A equivalent ultrafiltration (UF) membrane module TFMAX105MA is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
Features
- Outside-to-inside flow direction
- New generation PVDF hollow fiber
- Uniform pore size of 0.08 μm
- Typical filtrate turbidity ≤ 0.1 NTU
- Bacteria removal ≥ 4 log
Advantages
- High tolerance for feed water
- High-quality filtrate
- Less energy needed for high flux
- Longer service life by high fouling resistance and mechanical strength
- Economical equivalent module for direct replacement of Hydranautics HYDRAcap MAX 80-A
Applications
- Surface water
- Potable water
- Beverage clarification
- Industrial wastewater
- Reclaimed water reuse
- Pre-treatment of seawater desalination
Module Dimensions
Model |
L (mm/in) |
L1 (mm/in) |
L2 (mm/in) |
D (mm/in) |
D1 (mm/in) |
W (mm/in) |
Connection port |
Air inlet |
TFMAX105MA |
2340.6/92.15 |
2232.7/87.9 |
2110.9/83.11 |
250/9.84 |
290/11.42 |
172/6.8 |
DN50 (2” Victaulic) |
3/8” FNPT |
Specifications
Specifications |
Parameters |
Model |
TFMAX105MA |
Effective membrane area (m²/ft²) |
105/1130 |
Filtrate flow rate m3/h (gpm) |
3.6 - 12.6 (15.7 - 55.5) |
Dry weight (KG/lbs) |
62/135 |
Wet weight filled with water (KG/lbs) |
118/260 |
Membrane material |
PVDF (Polyvinylidene Fluoride) |
Fiber ID/OD |
0.6/1.2 mm (0.024/0.047 inch) |
Flow direction |
Outside-in |
Pore size |
0.08 μm |
Housing material |
UPVC |
Potting material |
Epoxy resin |
Operating and Cleaning Limits
Type of operation |
Dead-end flow or cross flow |
Typical flux (25°C) |
34 - 120 L/m2·h (20 - 71 gfd) |
Temperature |
1 - 40°C (34 - 104°F) |
Maximum feed pressure (20°C) |
5 bar (73 psi) |
Maximum feed pressure (40°C) |
3 bar (44 psi) |
Maximum trans-membrane pressure |
2 bar (30 psi) |
Backwash flux (25°C) |
75 - 120 L/m2·h (48 - 71 gfd) |
Maximum backwash pressure |
2.5 bar (36 psi) |
Maximum air scour feed pressure |
2.5 bar (36 psi) |
Air scour flow |
12.3 - 15.4 Nm3/h (7.3 - 9.1 acfm) |
Air scour duration |
2 - 4 minutes |
Air scour frequency |
Once every 20 - 60 minutes |
pH-Continuous operation @25°C |
2 - 11 |
pH-Cleaning @25°C |
1 - 13 |
Maintenance cleaning frequency |
1 - 3 times per day |
Maintenance clean duration |
20 - 30 minutes |
Disinfection chemicals |
NaOCl, ClO2 or NH2Cl |
Cleaning chemicals |
NaOH, HCl, H2SO4 or citric acid |
Instantaneous chlorine tolerance |
5,000 ppm |
Maximum chlorine exposure |
750,000 ppm-hrs |
Maximum feed TSS |
100 ppm |
Maximum feed turbidity |
300 NTU |
Maximum feed particle size |
300 µm |
Filtrate SDI15 |
≤ 2.5 |
Filtrate turbidity |
≤ 0.1 NTU |
We offer various UF membrane module equivalents. If you and your customer accept Hydranautics HYDRA cap MAX 80-A equivalent ultrafiltration membrane, please send us an inquiry now.
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China