Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • IPD-51XP Equivalent
IPD-51XP Equivalent

IPD-51XP Equivalent

 

 

Equivalent, replacement, alternative, analog, retrofit, analogue: DuPont DOW IPD-51XP, IPD 51XP, IPD51XP

General Information

TFIM-51DX is manufactured as an equivalent, direct replacement, alternative, analog, retrofit and analogue to replace DuPont DOW IPD-51XP (IPD51XP) UF membrane module.
TFIM-51DX membrane modules are pressurized integrated modules, which are designed and manufactured for the filtration of surface water, potable water, drinking water, food & beverage water and pre-treatment of sea water desalination etc. These UF modules are made of upgraded new generation PVDF hollow fibers with extra permeability.
These UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

  • Outside-to-inside flow direction
  • Upgraded new generation PVDF hollow fiber
  • Nominal pore size of 0.03 μm
  • Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU

 

 

Advantages

 

  • Integrated design for easy installation
  • High-quality filtrate
  • Less energy needed by extra high permeability
  • Longer service life by high fouling resistance and mechanical strength
  • Direct and economical module replacement

 

 

Applications

 

  • Surface water
  • Potable water
  • Drinking water
  • Beverage clarification
  • Pre-treatment of sea water desalination

 

 

Module Dimensions

 

DOW IPD-51XP Equivalent Module Dimensions

Part number

Application

L

L1

L2

D

W

 

TFIM-51DX

 

Drinking Water

1988±3 mm

(78.3±0.1 inch)

1689±3 mm

(66.5±0.1 inch)

1500±3 mm

(59.1±0.1 inch)

225 mm

(8.9 inch)

360 mm

(14.1 inch)

 
 
Specifications
 

Specifications

Parameters

Part number

 

TFIM-51DX

 

Effective membrane area

51 m² (549 ft²)

Volume

49 L (13 gallon)

Dry weight

53 KG (102 lbs)

Wet weight filled with water

117 KG (225 lbs)

Membrane material

PVDF (Polyvinylidene Fluoride)

Fiber ID/OD

0.7/1.3 mm (0.02/0.05 inch)

Flow direction

Outside-in

Pore size

0.03 μm

Housing material

UPVC

Clamp material

Stainless Steel

Potting material

Epoxy resin/Polyurethane

Feed, concentrate connector

DN100 coupling

Filtrate connector

DN40 union

Air connector

3/8”

 
 
Operating and Cleaning Limits
 

Type of operation

Dead-end flow or cross flow

Design flux(25°C)

40-120 L/m2·h(24-71 gfd)

Temperature

1-40°C(34-104°F)

Maximum feed pressure(20°C)

6.25 bar(90.6 psi)

Maximum feed pressure(40°C)

 4.75 bar(68.8 psi)

Maximum trans-membrane pressure

2.1 bar(30.5 psi)

Backwash flux(25°C)

80-120 L/m2·h(48-71 gfd)

Maximum backwash pressure

2.5 bar(36 psi)

Maximum air scour feed pressure

2.5 bar(36 psi)

Maximum air scour flow

4-12 Nm3/hr(2.4-7.1 scfm)

pH-Continuous operation @25°C

2-11

Maximum NaClO

 2,000 mg/L

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15

≤2.5

Filtrate turbidity

≤0.1 NTU

 


Previous Product:IP-77 Equivalent Next Product:IP-51XP Equivalent

Contact Us

    Name: Mr. Darren Wang

    Tel: +86-513-85556619

    Fax: +86-513-85556620

    E-mail: [email protected]

    Add: No. 60 Shengde Road, Tongzhou District, Nantong, Jiangsu Province, 226000, China.

    inquiry@tanaltech.com
WechatClose
Wechat