Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

HFU-1020AN Equivalent

Product No.：TFHFUP-1020A
Online Inquiry

Equivalent, replacement, alternative, analog, retrofit, analogue: Toray HFU-1020AN, HFU1020AN

General Information

TFHFUP-1020A ultrafiltration (UF) membrane module is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation TIPS (thermally induced phase separation) PVDF hollow fiber membrane with high tensile strength and fouling resistance.
TFHFUP-1020A UF module is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

Outside-to-inside flow direction
New generation PVDF hollow fiber
Nominal pore size of 0.01 μm
Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU

Advantages

High tolerance for feed water and high-quality filtrate
Smaller footprint design with CAPEX reduction
Less energy needed by high flux
Longer service life by high mechanical strength and fouling resistance
Economical equivalnet module for direct replacement of Toray's HFU-1020AN

Applications

Surface water
Well water
Potable water
Industrial process water
Reclaimed water reuse
Pre-treatment of sea water desalination

Module Dimensions

Model

(mm/in)

Feed, Filtrate

Concentrate

TFHFUP-1020A

1,120/

44.09

684/

26.93

274/

10.79

218/

8.58

216/

8.5

248/

9.76

175/

6.89

Φ89.1/

DN80

Φ76.3/

DN65

Specifications

Specifications	Parameters
Model	TFHFUP-1020A
Effective membrane area	29 m² (312 ft²)
Fiber ID/OD	0.9/1.4 mm (0.04/0.06 inch)
Membrane material	PVDF (Polyvinylidene Fluoride), TIPS
Flow direction	Outside-in
Pore size	0.01 μm
Housing material	PVC
End caps material	PVC
Potting material	Epoxy resin
Caps & nuts with housing	Integrated
O-rings material	EPDM
Dry weight	32 KG (71 lbs)
Wet weight filled with water	51 KG (112 lbs)

Operating and Cleaning Limits

Maximum feed flux	4.8 m³/h (21 gpm)
Maximum backwash flux	5.4 m³/h (23 gpm)
Type of operation	Dead-end flow
Design flux (25°C)	36-120 L/m²·h (21.6-71 gfd)
Temperature	0-40°C (32-104°F)
Maximum feed pressure (25°C)	3 bar (44 psi)
Maximum trans-membrane pressure	2 bar (29 psi)
Maximum backwash pressure	3 bar (44 psi)
Maximum air scour feed pressure	2.5 bar (36 psi)
Maximum air scour flow	9 Nm³/hr (5.3 scfm)
pH continuous operation @ 25°C	2-11
pH cleaning @ 25°C	1-12
Maximum NaClO	3,000 mg/L
Maximum NaClO exposure (lifetime contact time) as Cl₂	1,000,000 mg/L hours
Maximum feed TSS	100 ppm
Maximum feed turbidity	300 NTU
Maximum feed particle size	300 µm
Filtrate SDI₁₅	≤ 2.5
Filtrate turbidity	≤ 0.1 NTU

We offer various UF membrane module equivalents. If you and your customer accept Toray HFU-1020AN equivalent UF membrane module, please send us an inquiry now.

Previous Product：HFU-2020AN Equivalent Next Product：SMT900-P80 Equivalent