Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • MAX 80 Substitution
MAX 80 Substitution

MAX 80 Substitution

Substitution: Hydranautics HYDRAcap MAX 80

General Information

TFMAX105S is manufactured as a substitution similar to replace Hydranautics HYDRAcap MAX 80 UF membrane module.
Hydranautics HYDRAcap MAX 80 substitution ultrafiltration (UF) membrane module TFMAX105S is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
TFMAX105S UF modules are applied in flexible UF systems, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes such as NF and RO.

Features

  • Outside-to-inside flow direction
  • New generation PVDF hollow fiber
  • Uniform pore size of 0.08 μm
  • Typical filtrate turbidity ≤ 0.1 NTU
  • Bacteria removal ≥ 4 log

Advantages

  • High tolerance for feed water
  • High-quality filtrate
  • Less energy needed for high flux
  • Longer service life by high fouling resistance and mechanical strength
  • Economical substitution module for direct replacement of Hydranautics HYDRAcap MAX 80

Applications

  • Surface water
  • Potable water
  • Beverage clarification
  • Industrial wastewater
  • Reclaimed water reuse
  • Pre-treatment of seawater desalination

Module Dimensions

Hydranautics HYDRAcap MAX 80 Substitution UF Membrane Module Dimensions

Model

L

(mm/in)

L1

(mm/in)

L2

(mm/in)

D

(mm/in)

D1

(mm/in)

W

(mm/in)

Connection port

Air inlet

TFMAX105S

2340.6/92.15

2232.7/87.9

2110.9/83.11

250/9.84

290/11.42

172/6.8

DN50 (2” Victaulic)

3/8” FNPT

Specifications

Specifications

Parameters

Model

TFMAX105S

Effective membrane area (m²/ft²)

105/1130

Filtrate flow rate m3/h (gpm)

3.6 - 12.6 (15.7 - 55.5)

Dry weight (KG/lbs)

62/135

Wet weight filled with water (KG/lbs)

118/260

Membrane material

PVDF (Polyvinylidene Fluoride)

Fiber ID/OD

0.6/1.2 mm (0.024/0.047 inch)

Flow direction

Outside-in

Pore size

0.08 μm

Housing material

UPVC

Potting material

Epoxy resin

Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Typical flux (25°C)

34 - 120 L/m2·h (20 - 71 gfd)

Temperature

1 - 40°C (34 - 104°F)

Maximum feed pressure (20°C)

5 bar (73 psi)

Maximum feed pressure (40°C)

3 bar (44 psi)

Maximum trans-membrane pressure

2 bar (30 psi)

Backwash flux (25°C)

75 - 120 L/m2·h (48 - 71 gfd)

Maximum backwash pressure

2.5 bar (36 psi)

Maximum air scour feed pressure

2.5 bar (36 psi)

Air scour flow

12.3 - 15.4 Nm3/h (7.3 - 9.1 acfm)

Air scour duration

 2 - 4 minutes

Air scour frequency

Once every 20 - 60 minutes

pH-Continuous operation @25°C

2 - 11

pH-Cleaning @25°C

1 - 13

Maintenance cleaning frequency

1 - 3 times per day

Maintenance clean duration

20 - 30 minutes

Disinfection chemicals

NaOCl, ClO2 or NH2Cl

Cleaning chemicals

NaOH, HCl, H2SO4 or citric acid

Instantaneous chlorine tolerance

 5,000 ppm

Maximum chlorine exposure

750,000 ppm-hrs

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15

≤ 2.5

Filtrate turbidity

≤ 0.1 NTU

 
We offer various UF membrane substitutions. If you and your customer accept Hydranautics HYDRAcap MAX80 substitution ultrafiltration membrane, please send us an inquiry now. 

Previous Product:MAX80 Equivalent Next Product:MAX 80 Derivative

Contact Us

    Name: International Sales Dept.

    Tel: +86-27-8673 0002

    Fax: +86-27-8732 0476

    E-mail: [email protected]

    Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China

    inquiry@tanaltech.com
WechatClose
Wechat
WhatsappClose
Whatsapp