Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • ETUF-9060R Equivalent
ETUF-9060R Equivalent

ETUF-9060R Equivalent

Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution: First Line EuroTec ETUF-9060R, ETUF9060R

General Information

TFETV-60 is an equivalent, replacement, alternative, analog, retrofit and analogue to replace First Line EuroTec ETUF-9060R (ETUF9060R ) UF membrane module.
TFETV-60 ultrafiltration (UF) membrane module is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater, industrial wastewater and municipal sewage. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
TFETV-60 UF module is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.


  • Outside-to-inside flow direction
  • New generation PVDF hollow fiber
  • Nominal pore size of 0.025 μm
  • Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU


  • High quality raw material
  • High thermal and chemical solvent resistance
  • High chemical tolerance for cleaning
  • Optimized design, high resistance to fouling
  • Direct and economical module replacement


  • Surface water
  • Potable water
  • Pre-treatment of sea water desalination
  • Pre-treatment of industrial water
  • Industrial wastewater
  • Municipal sewage

Module Dimensions

EuroTec ETUF-9060R Equivalent Module Dimensions





Feed, Filtrate, Concentrate

2,340 mm
(92.13 inch)

316 mm
(12.44 inch)

344 mm
(13.54 inch)

216 mm
(8.5 inch)

1.5” FNPT




Part number


Effective membrane area

60 m² (645 ft²)

Membrane material

PVDF (Polyvinylidene Fluoride)

Fiber ID/OD

0.7/1.3 mm (0.02/0.05 inch)

Flow direction


Pore size

0.025 μm

Bacteria removal

> 99.9999%

Housing material


End caps material


Potting material

Polyurethane resin

O-rings material


Dry weight

60 KG (132 lbs)

Wet weight filled with water

100 KG (221 lbs)

Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Design flux (25°C)

60-120 L/m2·h (35-71 gfd)


1-40°C (34-104°F)

Maximum feed pressure (20°C)

2.5 bar (36.2 psi)

Maximum trans-membrane pressure

2 bar (29 psi)

Backwash flux (25°C)

80-120 L/m2·h (48-71 gfd)

Maximum backwash pressure

2 bar (29 psi)

Maximum air scour feed pressure

2.5 bar (36 psi)

Maximum air scour flow

4-12 Nm3/hr (2.4-7.1 scfm)

pH continuous operation @ 25°C


pH cleaning @ 25°C


Maximum NaClO

 2,000 mg/L

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15


Filtrate turbidity

≤0.1 NTU

Previous Product:HFU-1020AN Equivalent Next Product:Max 80 Equivalent

Contact Us

    Name: International Sales Dept.

    Tel: +86-27-8673 0002

    Fax: +86-27-8732 0476

    E-mail: [email protected]

    Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China