Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module
SFP-2660 Equivalent
- Product No.：TFSF-2660P
Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution: DuPont DOW SFP-2660, DOW SFP 2660, SFP2660
General Information
Features
- Outside-to-inside flow direction
- New generation PVDF hollow fiber
- Nominal pore size of 0.03 μm
- Typical filtrate quality SDI≤2.5, turbidity≤0.1 NTU
Advantages
- High tolerance for feed water
- High-quality filtrate
- Less energy needed by high flux
- Longer service life by high fouling resistance and mechanical strength
- Economical equivalent module for direct replacement of DuPont DOW SFP-2660
Applications
- Surface water
- Potable water
- Municipal sewage
- Beverage clarification
- Industrial wastewater
- Reclaimed water reuse
- Pre-treatment of sea water desalination
Module Dimensions
| Model |
Application |
L |
L1 |
D |
H |
Connector |
|
TFSF-2660P |
Industrial |
1863±3 mm (73.2±0.1 inch) |
1610±3 mm (63.4±0.1 inch) |
165 mm (6.5 inch) |
125 mm (4.9 inch) |
DN50, DN32 |
Specifications
Specifications
Parameters
Model
TFSF-2660P
Effective membrane area
33 m²(355 ft²)
Volume
16 L(4.2 gallon)
Dry weight
25 KG(55 lbs)
Wet weight filled with water
41 KG(90 lbs)
Membrane material
PVDF(Polyvinylidene Fluoride)
Fiber ID/OD
0.7/1.3 mm(0.02/0.05 inch)
Flow direction
Outside-in
Pore size
0.03 μm
Housing material
UPVC
Clamp material
Stainless Steel
Potting material
Epoxy resin/Polyurethane
|
Specifications |
Parameters |
| Model |
TFSF-2660P |
|
Effective membrane area |
33 m²(355 ft²) |
|
Volume |
16 L(4.2 gallon) |
|
Dry weight |
25 KG(55 lbs) |
|
Wet weight filled with water |
41 KG(90 lbs) |
|
Membrane material |
PVDF(Polyvinylidene Fluoride) |
|
Fiber ID/OD |
0.7/1.3 mm(0.02/0.05 inch) |
|
Flow direction |
Outside-in |
|
Pore size |
0.03 μm |
|
Housing material |
UPVC |
|
Clamp material |
Stainless Steel |
|
Potting material |
Epoxy resin/Polyurethane |
Operating and Cleaning Limits
|
Type of operation |
Dead-end flow or cross flow |
|
Design flux(25°C) |
40-120 L/m2·h(24-71 gfd) |
|
Temperature |
1-40°C(34-104°F) |
|
Maximum feed pressure(20°C) |
6.25 bar(90.6 psi) |
|
Maximum feed pressure(40°C) |
4.75 bar(68.8 psi) |
|
Maximum trans-membrane pressure |
2.1 bar(30.5 psi) |
|
Backwash flux(25°C) |
80-120 L/m2·h(48-71 gfd) |
|
Maximum backwash pressure |
2.5 bar(36 psi) |
|
Maximum air scour feed pressure |
2.5 bar(36 psi) |
|
Maximum air scour flow |
4-12 Nm3/hr(2.4-7.1 scfm) |
|
pH-Continuous operation @25°C |
2-11 |
|
Maximum NaClO |
2,000 mg/L |
|
Maximum feed TSS |
100 ppm |
|
Maximum feed turbidity |
300 NTU |
|
Maximum feed particle size |
300 µm |
|
Filtrate SDI15 |
≤2.5 |
|
Filtrate turbidity |
≤0.1 NTU |
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China
Mail inquiry
