Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module
IP-77XP Analogue
- Product No.:TFIM-77PXAE
Analogue: DuPont DOW IntegraPac IP-77XP, IP 77XP, IP77XP
General Information
Features
- Outside-to-inside flow direction
- Upgraded new generation PVDF hollow fiber
- Nominal pore size of 0.03 μm
- Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- Integrated design for easy installation
- High-quality filtrate
- Less energy needed by extra high permeability
- Longer service life by high fouling resistance and mechanical strength
- Direct and economical module replacement
Applications
- Surface water
- Potable water
- Municipal sewage
- Beverage clarification
- Industrial wastewater
- Reclaimed water reuse
- Pre-treatment of sea water desalination
Module Dimensions
Model |
Application |
L |
L1 |
L2 |
D |
W |
TFIM-77PXAG |
Industrial |
2488±3 mm (98±0.1 inch) |
2189±3 mm (86.2±0.1 inch) |
2000±3 mm (78.8±0.1 inch) |
225 mm (8.9 inch) |
360 mm (14.1 inch) |
Specifications
Specifications |
Parameters |
Model |
TFIM-77PXAG |
Effective membrane area |
77 m² (829 ft²) |
Volume |
39 L (10.3 gallon) |
Dry weight |
61 KG (100 lbs) |
Wet weight filled with water |
135 KG (220 lbs) |
Membrane material |
PVDF (Polyvinylidene Fluoride) |
Fiber ID/OD |
0.7/1.3 mm (0.02/0.05 inch) |
Flow direction |
Outside-in |
Pore size |
0.03 μm |
Housing material |
UPVC |
Clamp material |
Stainless Steel |
Potting material |
Epoxy resin/Polyurethane |
Feed, concentrate connector |
DN100 coupling |
Filtrate connector |
DN40 union |
Air connector |
3/8” |
Operating and Cleaning Limits
Type of operation |
Dead-end flow or cross flow |
Design flux(25°C) |
40-120 L/m2·h(24-71 gfd) |
Temperature |
1-40°C(34-104°F) |
Maximum feed pressure(20°C) |
6.25 bar(90.6 psi) |
Maximum feed pressure(40°C) |
4.75 bar(68.8 psi) |
Maximum trans-membrane pressure |
2.1 bar(30.5 psi) |
Backwash flux(25°C) |
80-120 L/m2·h(48-71 gfd) |
Maximum backwash pressure |
2.5 bar(36 psi) |
Maximum air scour feed pressure |
2.5 bar(36 psi) |
Maximum air scour flow |
4-12 Nm3/hr(2.4-7.1 scfm) |
pH-Continuous operation @25°C |
2-11 |
Maximum NaClO |
2,000 mg/L |
Maximum feed TSS |
100 ppm |
Maximum feed turbidity |
300 NTU |
Maximum feed particle size |
300 µm |
Filtrate SDI15 |
≤2.5 |
Filtrate turbidity |
≤0.1 NTU |
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China