Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • HFUG-2020AN Equivalent
HFUG-2020AN Equivalent

HFUG-2020AN Equivalent

Equivalent, replacement, alternative, analog, retrofit, analogue: Toray HFUG-2020AN, HFUG2020AN

General Information

TFHFU-2020AG is manufactured as the direct equivalent, replacement, alternative, analog, retrofit and analogue to replace Toray HFUG-2020AN (HFUG2020AN) UF membrane module.
TFHFU-2020AG ultrafiltration (UF) membrane module is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater, industrial wastewater and municipal sewage. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
TFHFU-2020AG UF module is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

  • Outside-to-inside flow direction
  • New generation PVDF hollow fiber
  • Nominal pore size of 0.01 μm
  • Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU

Advantages

  • High tolerance for feed water and high-quality filtrate
  • Smaller footprint design with CAPEX reduction
  • Less energy needed by high flux
  • Longer service life by high fouling resistance and mechanical strength
  • Direct and economical module replacement

Applications

  • Surface water
  • Well water
  • Potable water
  • Industrial process water
  • Reclaimed water reuse
  • Pre-treatment of sea water desalination

Module Dimensions

Module Dimensions of Toray UF Membrane HFUG-1020AN Equivalent

Model

L

(mm/in)

L1

(mm/in)

L2

(mm/in)

L3

(mm/in)

D

(mm/in)

D1

(mm/in)

W

(mm/in)

Feed, Filtrate

Concentrate

TFHFU-2020AG

2,160/

85.04

1,724/

67.87

1,314/

51.73

218/

8.58

248/

9.76

216/8.5

218/

8.58

Φ89.1/DN80

Φ76.3/

DN65

Specifications

Specifications

Parameters

Model

TFHFU-2020AG

Effective membrane area

90 m² (969 ft²)

Fiber ID/OD

0.7/1.1 mm (0.03/0.04 inch)

Membrane material

PVDF (Polyvinylidene Fluoride)

Flow direction

Outside-in

Pore size

0.01 μm

Housing material

PVC

End caps material

PVC

Potting material

Epoxy resin

Caps & nuts with housing

Integrated

O-rings material

EPDM

Dry weight

51 KG (112 lbs)

Wet weight filled with water

105 KG (232 lbs)

Operating and Cleaning Limits

Maximum feed flux

15 m3/h (66 gpm)

Maximum backwash flux

16.8 m3/h (74 gpm)

Type of operation

Dead-end flow

Design flux (25°C)

36-120 L/m2·h (21.6-71 gfd)

Temperature

0-40°C (32-104°F)

Maximum feed pressure (20°C)

3 bar (44 psi)

Maximum trans-membrane pressure

2 bar (29 psi)

Maximum backwash pressure

3 bar (44 psi)

Maximum air scour feed pressure

2.5 bar (36 psi)

Maximum air scour flow

9 Nm3/hr (5.3 scfm)

pH continuous operation @ 25°C

2-11

pH cleaning @ 25°C

1-12

Maximum NaClO

 3,000 mg/L

Maximum NaClO exposure (lifetime contact time) as Cl2

1,000,000 mg/L hours

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15

≤ 2.5

Filtrate turbidity

≤ 0.1 NTU


Previous Product:HFUG-2020N Equivalent Next Product:HFU-2020N Equivalent

Contact Us

    Name: Mr. Darren Wang

    Tel: +86-513-85556619

    Fax: +86-513-85556620

    E-mail: [email protected]

    Add: No. 60 Shengde Road, Tongzhou District, Nantong, Jiangsu Province, 226000, China.

    inquiry@tanaltech.com
WechatClose
Wechat