Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • IPD-77XP-08 Equivalent
IPD-77XP-08 Equivalent

IPD-77XP-08 Equivalent

Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: DuPont DOW IntegraPac Ultrafiltration Skid IPD-77XP-08, IPD77XP08

Other equivalent skid:
IPD-77XP-06, IPD-77XP-10, IPD-77XP-12, IPD-77XP-14, IPD-77XP-16, IPD-77XP-18, IPD-77XP-20, IPD-77XP-22

General Information

TFIMX-77D-08 is manufactured as equivalent, direct replacement, alternative, analogue and retrofit to DuPont DOW IntegraPac ultrafiltration skid IPD-77XP-08.
TFIM-77DX membrane modules are pressurized integrated modules, which are designed and manufactured for the filtration of surface water, potable water, drinking water, food & beverage water and pre-treatment of sea water desalination etc. These UF modules are made of upgraded new generation PVDF hollow fibers with extra permeability.
These UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

  • Outside-to-inside flow direction
  • Upgraded new generation PVDF hollow fiber
  • Nominal pore size of 0.03 μm
  • Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU

Advantages

  • Integrated design for easy installation
  • High-quality filtrate
  • Less energy needed by extra high permeability
  • Longer service life by high fouling resistance and mechanical strength
  • Direct and economical module replacement

Applications

  • Surface water
  • Potable water
  • Drinking water
  • Beverage clarification
  • Pre-treatment of sea water desalination

Module Dimensions

DOW IPD-77XP Equivalent Module Dimensions

Model

Application

L

L1

L2

D

W

 TFIM-77DX 

Drinking Water

2488±3 mm

(98±0.1 inch)

2189±3 mm

(86.2±0.1 inch)

2000±3 mm

(78.8±0.1 inch)

225 mm

(8.9 inch)

360 mm

(14.1 inch)

Specifications

Specifications

Parameters

Model

TFIM-77DX

Effective membrane area

77 m² (829 ft²)

Volume

39 L (10.3 gallon)

Dry weight

61 KG (100 lbs)

Wet weight filled with water

135 KG (220 lbs)

Membrane material

PVDF (Polyvinylidene Fluoride)

Fiber ID/OD

0.7/1.3 mm (0.02/0.05 inch)

Flow direction

Outside-in

Pore size

0.03 μm

Housing material

UPVC

Clamp material

Stainless Steel

Potting material

Epoxy resin/Polyurethane

Feed, concentrate connector

DN100 coupling

Filtrate connector

DN40 union

Air connector

3/8”

Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Design flux(25°C)

40-120 L/m2·h(24-71 gfd)

Temperature

1-40°C(34-104°F)

Maximum feed pressure(20°C)

6.25 bar(90.6 psi)

Maximum feed pressure(40°C)

 4.75 bar(68.8 psi)

Maximum trans-membrane pressure

2.1 bar(30.5 psi)

Backwash flux(25°C)

80-120 L/m2·h(48-71 gfd)

Maximum backwash pressure

2.5 bar(36 psi)

Maximum air scour feed pressure

2.5 bar(36 psi)

Maximum air scour flow

4-12 Nm3/hr(2.4-7.1 scfm)

pH-Continuous operation @25°C

2-11

Maximum NaClO

 2,000 mg/L

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15

≤2.5

Filtrate turbidity

≤0.1 NTU


Previous Product:SFP-2860 Retrofit Next Product:IP-77XP-08 Equivalent

Contact Us

    Name: International Sales Dept.

    Tel: +86-27-8673 0002

    Fax: +86-27-8732 0476

    E-mail: [email protected]

    Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China

    inquiry@tanaltech.com
WechatClose
Wechat