Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module
TARGA II 10072-35 Equivalent
- Product No.:TFTGX-80
Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Koch TARGA II 10072-35 0720709, TARGAII10072-35
General Information
TFTGX-80 is manufactured as the direct equivalent, replacement, alternative, retrofit and analogue to Koch TARGA II 10072-35 hollow fiber ultrafiltration cartridge.
TaFlux TGX series UF membrane modules TFTGX-80 are designed and manufactured as equivalents, which are used for production of process, potable water and wastewater. Major applications are the filtration of surface water, potable water, industrial wastewater and seawater.
TARGA II 10072-35 equivalent ultrafiltration modules use new-generation naturally hydrophilic PES hollow fiber ultra-filtration membrane with excellent performance. The mode of operation is feed-and-bleed with a minor cross flow or dead-end with regular backwash (with filtrate only) and chemically enhanced backwash..
Features
- Uniform pore size of 0.02 μm
- New-generation naturally hydrophilic polyethersulfone membrane
- High performance and very good anti-fouling characteristic
- Typical filtrate quality SDI < 3, turbidity < 0.1 NTU
- Membrane filtration provides 99.9999% (LOG 6) reduction of bacteria (Pseudomonas diminuta) and 99.99% (LOG 4) reduction of virus (MS2 colifages) by mechanical means.
Advantages
- High quality raw material
- High thermal and chemical solvent resistance
- Less energy needed by extra high permeability
- High chemical tolerance for cleaning
- Optimized design with high resistance to fouling
- Economical equivalent modules for direct replacement of Koch TARGA II 10072-35
Applications
- Surface water
- Potable water
- Seawater desalination
- Pre-treatment of industrial water
Module Dimensions
Model |
L (mm/inch) |
D (mm/inch) |
TFTGX-80 |
1829/72 |
273/10.75 |
Specifications
Model |
TFTGX-80 |
Effective membrane area |
80.9 m² (871 ft²) |
Weight |
45 KG (100 lbs) |
Membrane material |
PES (Polyethersulfone) |
Fiber ID/OD |
0.9/1.3 mm (0.035/0.051 inch) |
Pore size |
0.02 μm (100,000 dalton) |
Flow direction |
Inside-out |
Housing material |
PVC |
Clamp material |
Stainless steel |
Potting material |
Polyurethane resin |
End cap sealing |
EPDM |
Storage Solution |
Glycerin with water |
Operating and Cleaning Limits
Type of operation |
Dead-end flow or cross flow |
Design flux (25°C) |
68-150 L/m2·h (40-88 gfd) |
Working temperature |
1-40°C (34-104°F) |
Maximum working pressure (40°C) |
3 bar (45 psi) |
Maximum trans-membrane pressure |
2.1 bar (30 psi) |
Maximum backwash trans-membrane pressure |
1.7 bar (25 psi) |
Backwash flux (25°C) |
225-300 L/m2·h (133-176 gfd) |
pH range |
1.5 - 13 |
Maximum total chlorine (25°C) |
500 ppm @ pH > 10 |
Typical cleaning total chlorine (25°C) |
200 ppm @ pH > 10 |
Maximum backwash total chlorine (25°C) |
50 ppm @ pH > 9 |
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China