Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module
X-Flow HFS 60 Equivalent
- Product No.:TFHFS60V
Equivalent, replacement, alternative, analog, retrofit, analogue: Pentair X-Flow HFS 60, HFS60
General Information
TFHFS60V ultrafiltration membrane module is designed and manufactured as equivalent to replace Pentair X-Flow HFS 60 (HFS60) tight UF membrane module, which is used for for the removal of colloidal silica from surface water and endotoxin from pure water. Major applications are the filtration of surface water and industrial pure water. TFHFS60V ultrafiltration module uses naturally hydrophilic PES hollow fiber ultra-filtration membrane with excellent performance.
The mode of operation is feed-and-bleed with a minor cross flow or dead-end with regular backwash (with filtrate only) and chemically enhanced backwash.
Features
- MWCO of 10 kDa on dextranes
- Microporous symmetric structure
- New-generation naturally hydrophilic polyethersulfone membrane
- Designed for silica retention; typical > 99.8% for colloidal silica (tested on surface water containing 10 mg/l total silica and 1 mg/l colloidal silica)
- Typical permeate quality SDI<3, turbidity <0,1 NTU
Advantages
- High quality raw material
- High thermal and chemical solvent resistance
- High chemical tolerance for cleaning
- Optimized design, high resistance to fouling
- Economical equivalent module for direct replacement of Pentair X-Flow HFS 60 tight UF membrane in vertical configuration
Applications
- Surface water
- Potable water
- Pharmaceutical water
Module Dimensions
Model |
L |
L1 |
L2 |
L3 |
D |
D1 |
Feed, Filtrate, Concentrate connection |
TFHFS60V |
1,902/ 74.88 |
1,742/ 68.58 |
1,537.5/ 60.51 |
55/2.16 |
220/8.66 |
166/ 6.5 |
73/2.5 |
Specifications
Model |
TFHFS60V |
Effective membrane area (m²/ ft²) |
60/645 |
Fiber inner diameter (mm/inch) |
0.8/0.031 |
Membrane material |
PES (polyethersulfone) |
Housing material |
PVC |
Flow distributor material |
PVC |
Potting material |
Polyurethane resin |
Dry weight of membrane module |
34 KG (75 lbs) |
Wet weight filled with water |
66 KG (145 lbs) |
Operating and Cleaning Limits
Max. system pressure |
300 kPa (43 psi) |
Max. trans-membrane pressure |
300 kPa (43 psi) |
Max. backwash pressure |
450 kPa (65 psi) |
Temp. range |
0-40℃ (32-104°F) |
pH-Continuous operation @ 25℃ |
2 - 12 |
pH-CIP @ 25℃ |
1 - 13 |
Products Category
Contact Us

Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China