Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module

  • TARGA II 10048-35 Equivalent
TARGA II 10048-35 Equivalent

TARGA II 10048-35 Equivalent

Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Koch TARGA II 10048-35 0720708, TARGAII10048-35

General Information

TFTGX-51 is manufactured as the direct equivalent, replacement, alternative, retrofit and analogue to Koch TARGA II 10048-35 hollow fiber ultrafiltration cartridge.
TaFlux TGX series UF membrane modules 
TFTGX-51 are designed and manufactured as equivalents, which are used for production of process, potable water and wastewater. Major applications are the filtration of surface water, potable water, industrial wastewater and seawater.
TARGA II 10048-35 equivalent ultrafiltration modules use new-generation naturally hydrophilic PES hollow fiber ultra-filtration membrane with excellent performance. The mode of operation is feed-and-bleed with a minor cross flow or dead-end with regular backwash (with filtrate only) and chemically enhanced backwash..


  • Uniform pore size of 0.02 μm
  • New-generation naturally hydrophilic polyethersulfone membrane
  • High performance and very good anti-fouling characteristic
  • Typical filtrate quality SDI < 3, turbidity < 0.1 NTU
  • Membrane filtration provides 99.9999% (LOG 6) reduction of bacteria (Pseudomonas diminuta) and 99.99% (LOG 4) reduction of virus (MS2 colifages) by mechanical means.


  • High quality raw material
  • High thermal and chemical solvent resistance
  • Less energy needed by extra high permeability
  • High chemical tolerance for cleaning
  • Optimized design with high resistance to fouling
  • Economical equivalent element for direct replacement to Koch TARGA II 10048-35


  • Surface water
  • Potable water
  • Seawater desalination
  • Pre-treatment of industrial water

Module Dimensions

Koch TARGA II 10048-35 Equivalent Ultrafiltration Cartridge Module Dimensions


L (mm/inch)

D (mm/inch)







Effective membrane area

51.5 m² (554 ft²)


39 KG (86 lbs)

Membrane material

PES (Polyethersulfone)

Fiber ID/OD

0.9/1.3 mm (0.035/0.051 inch)

Pore size

0.02 μm (100,000 dalton)

Flow direction


Housing material


Clamp material

Stainless steel

Potting material

Polyurethane resin

End cap sealing


Storage Solution

Glycerin with water

Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Design flux (25°C)

 68-150 L/m2·h (40-88 gfd)

Working temperature

1-40°C (34-104°F)

Maximum working pressure (40°C)

3 bar (45 psi)

Maximum trans-membrane pressure

2.1 bar (30 psi)

Maximum backwash trans-membrane pressure

1.7 bar (25 psi)

Backwash flux (25°C)

225-300 L/m2·h (133-176 gfd)

pH range

1.5 - 13

Maximum total chlorine (25°C)

500 ppm @ pH > 10

Typical cleaning total chlorine (25°C)

200 ppm @ pH > 10

Maximum backwash total chlorine (25°C)

50 ppm @ pH > 9

Contact Us

    Name: International Sales Dept.

    Tel: +86-27-8673 0002

    Fax: +86-27-8732 0476

    E-mail: [email protected]

    Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China