Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Industrial RO Membrane >> Brackish Water RO Membrane

  • TMG20D-400 Equivalent
TMG20D-400 Equivalent

TMG20D-400 Equivalent

Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution: Toray TMG20D-400, TMG20D400

General Information

TFFRLE-8040PROT is manufactured as an equivalent, replacement, alternative, retrofit, analogue to Toray TMG20D-400 (TMG20D400) RO membrane element.
Toray TMG20D-400 equivalent reverse osmosis membrane elements TFFRLE-8040PROT are developed for brackish water treatment, ideal for reverse osmosis plant managers and operators dealing with brackish water with pre-treatment.
This reverse osmosis membrane element provides consistency, high permeate water quality, high performance and productivity, and long service life.

Features & Advantages

  • Provides high-quality permeate water
  • Stable salt rejection rate and high permeate flow rate
  • Optimized design, good resistance to fouling results in long service life
  • High chemical tolerance for cleaning with highly effective cleaning performance
  • Simple and economical element replacement

Applications

  • Industrial pure water
  • Industrial wastewater reuse
  • Slightly contaminated water

Specifications

  • Configuration: Spiral wound element
  • Membrane Polymer: Polyamide thin-film composite

Performance

Element Model

Membrane Active Area
ft2 (m2)

Feed Spacer
mil (mm)

Permeate Flow Rate*
GPD (m3/d)

Stabilized Salt Rejection**

Minimum Salt Rejection

TFFRLE-8040PROT

400 (37.2)

34 (0.864)

11,500 (43.6)

99.7%

99.5%

Standard test conditions:
The above performance is initial(data record after 30 minutes of operation), based on the following conditions:
2,000 ppm NaCl solution
150 psi (10.3 bar) operating pressure
25°C (77°F) operating temperature
15% permeate recovery
7.5-8 pH range
*Permeate flow for individual elements may vary but will be no more than ±15%.
**Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending on feed water characteristics and operating conditions.
Element Dimensions
Toray TMG20D-400 Equivalent RO Membrane Element Dimensions

Length L
inch (mm)

Diameter D
inch (mm)

Permeate tube inner diameter d inch (mm)

40 (1,016)

7.9 (201)

1.125 (28.6)

Operating and Cleaning Limits

Maximum Operating Pressure

600 psi (41 bar)

Maximum Operating Temperature

45°C (113°F)

Maximum Chlorine Concentration

0.1 ppm

pH Range, Continuous

2-11

pH Range, Cleaning

1-13

Maximum Feed SDI (15 mins)

5

Maximum Element Pressure Drop

15 psi (1 bar)

Maximum Feed Flow

17 m3/h

Minimum Ratio of Concentrate to Permeate Flow for Each Element

5:1

The limits shown above are for general applications. For specific projects, operating at more conservative values may ensure the best performance and longest life of the membrane element.

Previous Product:CPA3 Equivalent Next Product:Eco Pro-400i Equivalent

Contact Us

    Name: International Sales Dept.

    Tel: +86-27-8673 0002

    Fax: +86-27-8732 0476

    E-mail: [email protected]

    Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China

    inquiry@tanaltech.com
WechatClose
Wechat