Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module
K600ETI - 55 Equivalent
- Product No.:TFETV-55
Equivalent, replacement, alternative, analog, retrofit, analogue: Hyflux K600ETI - 55, KRISTAL 600ETI - 55, K600ETI55
General Information
TFETV-55 ultrafiltration (UF) membrane module is a pressurized module, which is designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
Features
-
Outside-to-inside flow direction
-
New generation PVDF hollow fiber
-
Nominal pore size of 0.025 μm
-
Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- High quality raw material
- High thermal and chemical solvent resistance
- High chemical tolerance for cleaning
- Optimized design, high resistance to fouling
- Economical equivalent module for direct replacement of Hyflux K600ETI-55
Applications
- Surface water
- Potable water
- Pre-treatment of sea water desalination
- Pre-treatment of industrial water
- Industrial wastewater
Module Dimensions
L |
L1 |
D |
D1 |
Feed, Filtrate, Concentrate |
2,340 mm |
316 mm |
344 mm |
216 mm |
1.5” FNPT |
Specifications
Specifications |
Parameters |
Part number |
TFETV-55 |
Effective membrane area |
55 m² (592ft²) |
Membrane material |
PVDF (Polyvinylidene Fluoride) |
Fiber ID/OD |
0.7/1.3 mm (0.02/0.05 inch) |
Flow direction |
Outside-in |
Pore size |
0.025 μm |
Bacteria removal |
> 99.9999% |
Housing material |
UPVC |
End caps material |
UPVC |
Potting material |
Polyurethane resin |
O-rings material |
EPDM |
Dry weight |
60 KG (132 lbs) |
Wet weight filled with water |
100 KG (221 lbs) |
Operating and Cleaning Limits
Type of operation |
Dead-end flow or cross flow |
Design flux (25°C) |
60-120 L/m2·h (35-71 gfd) |
Temperature |
5-40°C (41-104°F) |
Maximum feed pressure (20°C) |
2.5 bar (36.2 psi) |
Maximum trans-membrane pressure (TMP) |
2 bar (29 psi) |
Backwash flux (25°C) |
80-120 L/m2·h (48-71 gfd) |
Maximum backwash TMP |
2 bar (29 psi) |
Maximum air scour feed pressure |
2.5 bar (36.2 psi) |
Maximum air scour flow |
4-12 Nm3/hr (2.4-7.1 scfm) |
pH continuous operation @ 25°C |
2-11 |
pH cleaning @ 25°C |
1-12 |
Maximum NaClO (continuous operation) |
30 mg/L |
Maximum NaClO (cleaning) |
5,000 mg/L |
Maximum feed TSS |
100 ppm |
Maximum feed turbidity |
300 NTU |
Maximum feed particle size |
300 µm |
Filtrate SDI15 |
≤2.5 |
Filtrate turbidity |
≤0.1 NTU |
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China