Products >> Hollow Fiber MBR Module >> PVDF MBR Membrane Module

60E0040SA Equivalent

Product No.：TFEM40
Online Inquiry

Equivalent, equivalence, replacement, alternative, alternate, analog, retrofit, analogue, derivative, substitution: Mitsubishi STERAPORETM 6000 Series (PVDF) Element 60E0040SA MBR Membrane

General Information

TFEM40 is manufactured as an equivalent, direct replacement, alternative, retrofit and analogue to Mitsubishi STERAPORETM 6000 Series (PVDF) Element 60E0040SA.
They are suitable for replacement in Mitsubishi STERAPORETM 6000 Series PVDF Module 60M0400FF, 60M0800FF, 60M1200FF, 60M1600FF, 60M2400FF MBR Module.
These hollow fiber MBR membrane modules are developed and manufactured mainly for wastewater and sewage treatment plants. Consisting of a 0.4 micron PVDF ultrafiltration hollow fiber membrane, TaFlux Era M MBR modules provide excellent physical barrier to suspended solids, bacteria and other pathogens. The uniform pore size distribution ensures high permeability and sustainable high-quality filtrate.
The new generation of large modules for MBR applications are upgrade-designed and improved, while continuing to leverage the aeration and header design.
These submerged hollow fiber membrane modules are providing economical, comprehensive wastewater and sewage solutions to industrial and municipal applications around the globe.

Membrane Characteristics

Reinforced membrane
Manufacturing process of arraying fibers
Soft resin protection on potting part
Finer pore size
High resistance to fouling

Advantages

Long service life to reduce OPEX
Less sludge accumulation
High quality filtrate
Stable flux with high recovery rate by cleaning
Economical module for direct replacement

Applications

Industrial wastewater
Municipal sewage
Domestic sewage
Submerged filtration
Pretreatment of industrial water

Module Dimensions

Model	H (mm/inch)	W (mm/inch)	T (mm/inch)
TFEM40	2,000/78.74	1,250/49.21	30/1.18

Specifications

Model	TFEM40
Membrane Surface Areas (m²/ft²)	40/430
Membrane Material	Reinforced PVDF (PET supporting layer)
Pore Size (μm)	0.4
ID/OD (mm/inch)	0.65/1.65 (0.03/0.06)
Flow Direction	Outside-in
Sealing Material	Polyurethane resin
Conduit Material	ABS
Shaft	SUS316L
Module Weight (kg/lb)	15/33

Operating and Cleaning Limits

Model	TFEM40
Flux Design (LMH)	10 - 35*
Operation Flow (L/H)	400 - 1,400
Flow Type	Negative Suction Pressure
Backwash Type	Air Water Backwash
Max TMP (MPa/psi)	-0.055/-8
Operating Temperature (℃/°F)	5 - 45/41 - 113
Operation pH Range	2 - 11
Cleaning pH Range	1 - 12
Max Active Chlorine (ppm)	1,000