Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module
W10-RAS111 Equivalent
- Product No.:TFLQ75-RAS666
Equivalent, replacement, alternative, analog, retrofit, analogue, derivative, substitution: Membrana Liqui-Flux Membrane Module UF-PES Series Type W10-RAS111, W10RAS111
General Information
TFLQ75-666 is manufactured as the direct equivalent, replacement, alternative, analog, retrofit, analogue, derivative and substitution to replace Membrana Liqui-Flux W10-RAS111 (W10RAS111) UF membrane module.
TFLQ75-666 ultrafiltration (UF) membrane modules are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water and process water etc. These UF modules are made of new generation PES hollow fiber membrane with high fouling resistance and hydrophilicity.
TFLQ75-666 UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.
Features
- Inside-to-outside flow direction
- New generation PES hollow fiber
- Nominal pore size of 0.02 μm
- Typical filtrate quality SDI ≤ 2.5, turbidity ≤ 0.1 NTU
Advantages
- High tolerance for feed water
- High-quality filtrate
- Less energy needed by high flux
- Longer service life by high fouling resistance
- Direct and economical module replacement
Applications
- Surface water
- Potable water
- Industrial process water
- Pre-treatment of sea water desalination
Module Dimensions
Model |
L (mm/inch) |
L1 (mm/inch) |
L2 (mm/inch) |
D (mm/inch) |
TFLQ75 |
1,543/60.75 |
1,223/48.15 |
57/2.24 |
320/12.6 |
Specifications
Specifications |
Parameters |
Effective membrane area |
75 m² (807 ft²) |
Membrane material |
PES (Polyethersulfone) |
Fiber ID/OD |
0.8/1.2 mm (0.03/0.05 inch) |
Pore size |
0.02 μm |
Flow direction |
Inside-out |
Housing material |
PVC |
Clamp material |
Stainless steel |
Potting material |
Polyurethane resin |
End cap sealing |
EPDM |
Connection port |
Variable (refer to Ordering Guide) |
Dry weight |
51 KG (113 lbs) |
Wet weight filled with water |
133 KG (293 lbs) |
Operating and Cleaning Limits
Type of operation |
Dead-end flow or cross flow |
Design flux (25°C) |
50-150 L/m2·h (29-88 gfd) |
Working temperature @4 bar (58 psi) |
1-40°C (34-104°F) |
Maximum working pressure (20°C) |
6 bar (87 psi) |
Maximum trans-membrane pressure |
2.5 bar (36 psi) |
Typical trans-membrane pressure |
0.1-0.7 bar (1.5-10 psi) |
Backwash flux (25°C) |
225-300 L/m2·h (133-176 gfd) |
Typical backwash trans-membrane pressure |
0.5-2 bar (7-30 psi) |
pH-Continuous operation @25°C |
2-12 |
Cleaning chemicals |
NaOH, NaOCl, HCl |
pH-Cleaning @25°C |
1-13 |
Maximum instantaneous free chlorine concentration |
200 ppm |
Maximum free chlorine exposure |
200,000 ppm |
Ordering Guide
Module Type |
Membrane Area |
- |
Bottom Connection |
Top Connection |
Filtrate Connection |
Dimension of Bottom Connection |
Dimension of Top Connection |
Dimension of Filtrate Connection |
|||||||
TFLQ |
75 |
=75 m² |
- |
A |
=axial |
A |
=axial |
B |
=bent |
2 |
=Victaulic 63 mm |
2 |
=Victaulic 63 mm |
2 |
=Victaulic 63 mm |
|
|
|
|
R |
=radial |
R |
=radial |
D |
=double |
|
|
|
|||
|
|
|
|
|
|
|
|
S |
=single |
3 |
=Victaulic 73 mm |
3 |
=Victaulic 73 mm |
3 |
=Victaulic 73 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
6 |
=Victaulic 76 mm |
6 |
=Victaulic 76 mm |
6 |
=Victaulic 76 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
Example model: TFLQ75-RAS666 refers to TaFlux Liq series UF membrane module, L 1,543 mm, D 320 mm, 75 m2, V76 radial bottom connection, V76 axial top connection, V76 single filtrate connection.
Products Category
Contact Us
Name: International Sales Dept.
Tel: +86-27-8673 0002
Fax: +86-27-8732 0476
E-mail: [email protected]
Add: 4th Floor, Baofeng Ages, 1045 Jiefang Blvd, Qiaokou District, Wuhan, Hubei Province, 430030, China