Economical equivalents with quick delivery for membrane replacement of your water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

  • SFD-2860 Equivalent
SFD-2860 Equivalent

SFD-2860 Equivalent

 

Equivalent, replacement, alternative, analog, retrofit, analogue: DuPont DOW SFD 2860, DOW SFD-2860, SFD2860

General Information

TFSF-2860D is manufactured as an equivalent, direct replacement, alternative, analog, retrofit and analogue to replace DuPont DOW SFD 2860 (SFD-2860) UF membrane module.
TFSF-2860D membrane modules are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water, drinking water, food & beverage water and pre-treatment of sea water desalination etc. These UF modules are made of new generation PVDF hollow fiber membrane with high fouling resistance and hydrophilicity.
TaFlux SF series UF modules are applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

  • Outside-to-inside flow direction
  • New generation PVDF hollow fiber
  • Nominal pore size of 0.03 μm
  • Typical filtrate quality SDI≤2.5, turbidity≤0.1 NTU

Advantages

  • High tolerance for feed water
  • High-quality filtrate
  • Less energy needed by high flux
  • Longer service life by high fouling resistance and mechanical strength
  • Direct and economical module replacement

Applications

  • Surface water
  • Potable water
  • Drinking water
  • Beverage clarification
  • Pre-treatment of sea water desalination

Module Dimensions

DOW SFP-2860 Equivalent Module Dimensions

Part number

Application

L

L1

D

H

Connector

TFSF-2860D

Drinking Water

1860±3 mm

(73.2±0.1 inch)

1630±3 mm

(64.2±0.1 inch)

225 mm

(8.9 inch)

180 mm

(7.1 inch)

DN50

Specifications

Specifications

Parameters

Part number

TFSF-2860D

Effective membrane area

51 m²(549 ft²)

Volume

35 L(9.3 gallon)

Dry weight

48 KG(83 lbs)

Wet weight filled with water

106 KG(183 lbs)

Membrane material

PVDF (Polyvinylidene Fluoride)

Fiber ID/OD

0.7/1.3 mm(0.02/0.05 inch)

Flow direction

Outside-in

Pore size

0.03 μm

Housing material

UPVC

Clamp material

Stainless Steel

Potting material

Epoxy resin/Polyurethane

Operating and Cleaning Limits

Type of operation

Dead-end flow or cross flow

Design flux(25°C)

40-120 L/m2·h(24-71 gfd)

Temperature

1-40°C(34-104°F)

Maximum feed pressure(20°C)

6.25 bar(90.6 psi)

Maximum feed pressure(40°C)

 4.75 bar(68.8 psi)

Maximum trans-membrane pressure

2.1 bar(30.5 psi)

Backwash flux(25°C)

80-120 L/m2·h(48-71 gfd)

Maximum backwash pressure

2.5 bar(36 psi)

Maximum air scour feed pressure

2.5 bar(36 psi)

Maximum air scour flow

4-12 Nm3/hr(2.4-7.1 scfm)

pH-Continuous operation @25°C

2-11

Maximum NaClO

 2,000 mg/L

Maximum feed TSS

100 ppm

Maximum feed turbidity

300 NTU

Maximum feed particle size

 300 µm

Filtrate SDI15

≤2.5

Filtrate turbidity

≤0.1 NTU

 


Previous Product:SFP-2860XP Equivalent Next Product:SFD-2880 Equivalent

Contact Us

    Name: Mr. Darren Wang

    Tel: +86-513-85556619

    Fax: +86-513-85556620

    E-mail: [email protected]

    Add: No. 60 Shengde Road, Tongzhou District, Nantong, Jiangsu Province, 226000, China.

    inquiry@tanaltech.com
WechatClose
Wechat