Economical equivalent membranes with quick delivery for replacement in water and wastewater treatment projects.

Products >> Hollow Fiber UF Membrane Module >> PES UF Membrane Module

  • Suez ZW700B Equivalent UF Membrane Module
Suez ZW700B Equivalent UF Membrane Module

Suez ZW700B Equivalent UF Membrane Module

Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution to: Suez ZW700B UF membrane module

Equivalent Comparison Chart

Parameters

Module

Equivalent Module

Model

Suez ZW700B

TF7B0.9D-60WRL

Dimensions

D 250 mm, L 1687 mm

D 250 mm, L 1687 mm

Membrane Material

PES

PES

Fiber Configuration

7-bore

7-bore

Pore Size

0.02 µm

0.02 µm

Membrane Area

60 m2

60 m2

Flow Direction

Inside-out

Inside-out

Type of operation

Dead-end flow or cross flow

Dead-end flow or cross flow

General Information

TF7B0.9D-60WRL is manufactured as the direct equivalent, replacement, alternative, retrofit and analogue to replace Suez ZW700B UF membrane module.

TF7B0.9D-60WRL ultrafiltration membrane modules are developed and manufactured as equivalents, which are used for production of process water, potable water and wastewater. Major applications are the filtration of surface water, potable water, seawater and industrial wastewater. TF7B0.9D-60WRL ultrafiltration modules use Tanal’s SevBore fiber technology with an inside-out flow direction. SevBore fibers are naturally hydrophilic 7-bore PES hollow fibers by advanced ultrafiltration technology, which makes TF7B0.9D-60WRL ultrafiltration membrane modules the most robust PES (polyethersulfone) UF membrane on the market.

The mode of operation is either dead-end or cross-flow (though cross flow mode is only used in certain circumstances), backwash (with filtrate only) at regular intervals and chemically enhanced backwash are required for the continuous operation.

Features

  • The 3rd generation modified PES membrane fibers of 7 bores
  • A nominal pore size of 0.02 μm for optimal removal of particles, bacteria and viruses
  • Inside-out flow direction without air scouring
  • Typical filtrate quality SDI < 2.5, turbidity < 0.1 NTU

Advantages

  • Extremely high mechanical strength with no fiber breakage
  • High chemical tolerance
  • High-quality filtrate by reliable blocking of microorganisms and viruses
  • Minimum operating costs and efficient backwash
  • Economical equivalent module for direct replacement to Suez ZW700B as plug-and-play

Applications

  • Portable water
  • Municipal water
  • Industrial process water
  • Reclaimed water reuse
  • Pre-treatment of seawater desalination

Module Dimensions

Suez ZW700B Equivalent UF Membrane Module Dimensions

Model

Overall length L (mm/inch)

Length feed connectors L1 (mm/inch)

Length without end caps L2 (mm/inch)

Length top feed to filtrate connector L3 (mm/inch)

Diameter without end caps D (mm/inch)

End cap clamp diameter D1 (mm/inch)

Connector length W (mm/inch)

Feed, Filtrate connector (d)

TF7B0.9D-60WRL

1,687/66.41

1,599/62.95

1,485/58.46

191/7.52

250/10

295/11.61

55/2.17

2”

Specifications

Model

TF7B0.9D-60WRL

Effective membrane area

60 m²/645.9 ft²

Fiber ID/OD

0.9/4.0 mm (0.04/0.16 inch)

Membrane material

Modified PES (polyethersulfone), 7 bores

Pore size

0.02 μm

Housing material

UPVC

End cap material

UPVC

Clamp material

Stainless Steel

Sealing material

EPDM

Potting material

Epoxy resin

Feed/filtrate connector

DN50 (2 inch Victaulic)

Weight

55 kg/120 lb

Operating and Cleaning Limits

Flow direction

Inside-out

Type of operation

Dead-end flow or cross flow

Temperature range

1-40℃ (34-104°F)

Max. rate of temperature change (per minute)

5℃ (9°F)

Max. feed pressure

0.5 MPa (72.5 psi)

Max. rate of pressure change (per second)

0.05 MPa (7.25 psi)

Max. trans-membrane pressure

0.15 MPa (21.75 psi)

Max. backwash pressure

0.3 MPa (43.5 psi)

Filtration flux

60-180 L/m2·h (35-105 gfd)

Max. backwash/forward flush

230-300 L/m2·h (135-175 gfd)

pH-continuous operation @ 25℃

2 - 11

pH-CIP @ 25℃

1 - 13

Hypochlorite (NaOCl) for cleaning

50 to 200 ppm

Hydrogen peroxide for cleaning

100 to 500 ppm

Why choose Tanal for equivalent membranes?

High-Performance Membranes: engineered with advanced membrane technology for stable flux and long service life.
Guaranteed Quality Consistency: 100% integrity testing on every membrane module before delivery.
Cost Advantage & Fast Delivery: fully integrated supply chain in China ensures competitive pricing and short lead times.
Certified & Reliable Partner: operated under ISO 9001, ISO 14001 and ISO 45001 management systems.

Tanal offers equivalent replacement UF membrane modules for various brands. If you and your customer accept Suez ZW700B equivalent UF membrane module, please send us an inquiry now.

WechatClose
Wechat
WhatsappClose
Whatsapp