Products >> Hollow Fiber UF Membrane Module >> PVDF UF Membrane Module

SMT900-P80 Equivalent

Product No.：TFSFXP-2880(X)P
Online Inquiry

Equivalent, equivalence, replacement, alternative, analog, retrofit, analogue, derivative, substitution: Scinor UF Membrane SMT900-P80, Scinor SMT900-P80, SMT900-P80

General Information

TFSFXP-2880(X)P is manufactured as an equivalent, replacement, alternative, retrofit, analogue, derivative and substitution to replace Scinor SMT900-P80 UF membrane module.

TFSFXP-2880(X)P membrane modules are pressurized modules, which are designed and manufactured for the filtration of surface water, potable water, seawater and industrial wastewater. These UF modules are made of upgraded new generation TIPS (thermally induced phase separation) PVDF hollow fibers with extra permeability than SF series.

TFSFXP-2880(X)P UF module is applied in new systems, as well as directly connected to existing UF systems as replacements, providing high-quality filtrate by removing suspended solids, colloids, pyrogens, bacteria, viruses and other impurities to protect downstream processes.

Features

Outside-to-inside flow direction
New generation PVDF hollow fiber
Nominal pore size of 0.1 μm
Typical filtrate quality SDI≤2.5, turbidity≤0.1 NTU

Advantages

Extra high tensile strength for longer service life
High tolerance foe feed water
High-quality filtrate
Less energy needed for high flux
Longer service life by high fouling resistance and mechanical strength
Economical equivalent module for direct replacement of Scinor SMT900-P80

Applications

Surface water
Potable water
Beverage clarification
Industrial wastewater
Reclaimed water reuse
Pre-treatment of sea water desalination

Module Dimensions

Scinor UF Membrane SMT900-P80 equivalent Dimensions

Model

Application

Connector

TFSFXP-2880(X)P

Industrial

2360±3 mm

(92.9±0.1 inch)

2130±3 mm

(83.9±0.1 inch)

225 mm

(8.9 inch)

180 mm

(7.1 inch)

DN50

Specifications

Specifications	Parameters
Part number	TFSFXP-2880(X)P
Effective membrane area	80 m²(861 ft²)
Volume	39 L(10.3 gallon)
Dry weight	61 KG(100 lbs)
Wet weight filled with water	135 KG(220 lbs)
Membrane material	PVDF(Polyvinylidene Fluoride), TIPS
Fiber ID/OD	0.7/1.3 mm(0.02/0.05 inch)
Flow direction	Outside-in
Pore size	0.1 μm
Housing material	UPVC
Clamp material	Stainless Steel
Potting material	Epoxy resin/Polyurethane

Operating and Cleaning Limits

Type of operation	Dead-end flow or cross flow
Design flux (25°C)	40 - 120 L/m²·h (24 - 71 gfd)
Flux range per module	2.0 - 8.5 m³/h (8.8 - 37.4 gpm)
Temperature	1 - 40°C (34 - 104°F)
Maximum feed pressure (20°C)	6.25 bar (90.6 psi)
Maximum feed pressure (40°C)	4.75 bar (68.8 psi)
Maximum trans-membrane pressure	2.1 bar (30.5 psi)
Backwash flux (25°C)	80 - 120 L/m²·h (48 - 71 gfd)
Maximum backwash pressure	2.5 bar (36 psi)
Maximum air scour feed pressure	2.5 bar (36 psi)
Maximum air scour flow	4 - 12 Nm³/h (2.4 - 7.1 scfm)
pH-Continuous operation @25°C	2 - 11
Maximum NaClO	2,000 mg/L
Maximum feed TSS	100 ppm
Maximum feed turbidity	300 NTU
Maximum feed particle size	300 µm
Filtrate SDI₁₅	≤ 2.5
Filtrate turbidity	≤ 0.1 NTU

We offer various UF membrane module equivalents. If you and your customer accept Scinor SMT900-P80 equivalent UF membrane module, please send us an inquiry now.

Previous Product：HFU-1020AN Equivalent Next Product：UNA-620A Equivalent